Traction Hog Floor Mat
- U.V. Stable
- Slip resistant silicone carbide coated surface provides traction wet, oily areas.
- Low Profile allows safety and carts to move
- Certified slip-resistant by the National Floor Safety Institute.
Please Call For a Quote!
Holes | No Holes
Product Material Dimensions:
Rubber Type – Silicone Carbide impregnated urethane coated on Nitrile Rubber
Thickness – 1/8″
Durometer – 65
Passes Flammability Standard DOC-FF-1-70
Anti-Static – Electrical resistance rating 10^8 ohms.
Static Decay Test Method 4046 Federal Standard 101B/NFPA 99 12-188.8.131.52 (f)(3)(i) – Maximum Time Recorded: .91 sec.
Slip Resistance Surface: ASTM C10280-96 Coefficient of Friction: Dry – .78
Anti-fatigue mats should be cleaned daily by sweeping or brushing to remove loose soil and debris. These impurities can cause excessive wear on the surface of the mats and shorten product life. The floor under the mats should also be kept as clean and dry as possible to protect the bottom of the mats and reduce mat movement.
On a regular basis, anti-fatigue mats should be cleaned with water-based cleaners to remove oil and grease where needed. We do not recommend the use of solvent-based cleaners. It is important to use cleaners strong enough with proper agitation to remove fats and other food related oils. Research has shown that even grease-proof rubber can be affected by grease and oil if the grease and oil are allowed to remain in contact with the mat for extended periods of time. Andersen recommends thorough cleaning at least weekly to avoid prolonged contact of grease with the rubber.
Only logged in customers who have purchased this product may leave a review.
If you need replacement graphics or replacement parts that you can’t find online give us a call at 1-877-268-7469. We will do everything we can to accommodate your needs.