- Outstanding Anti-Fatigue qualities
- U.V. Stable.
- Extra thick rubber top (.170”) ensures long life and is easy to clean.
- Smooth diamond pattern rubber top allows workers to pivot freely.
- Closed-cell Nitrile/PVC cushion backing provides long lasting comfort.
- Cushion is not glued on but is permanently molded to the rubber top eliminating the possibility of delamination.
- Premium closed-cell Nitrile/PVC cushion backing provides long-lasting comfort.
- Recommended for use at cashier stations, bank teller areas, hotel check-ins, pharmacies and schools.
Hog Heaven Marble Top Floor Mat
Please Call For a Quote!
2’x 3’ | 3’ x 5’ | 3 x 12’ | 4′ x 6′
Amber Maple | Blue Merle | Granite Dusk | Midnight Swirl | Vintage Pecan
Product Material Dimensions:
Rubber Type – SBR/Nitrile Rubber (20% Recycled Content)
Thickness – .170”
Durometer – 90 Shore A
Tensil – 1100 PSI
Rubber Type – Nitrile/PVC
Thickness – .5″ or .75″
Density – 5.5 to 7.5 lbx/ft³
Water Absorption – ASTM D 1667- .01 lb/sq ft maximum
Flammability – FMVSS302- 0 Burn (pass)
Temperature Use – ASTM D 1056- Cold Crack: -20 degrees F High: 200 Degrees intermittent exposure
Passes Flammability Standard DOC-FF-1-70
Passes ATTCC Test method 134-1996 Electrostatic Propensity of Carpets: Maximum Voltage Negative 0.7 KV
Static Decay Test Method 4046 Federal Standard 101B/NFPA 99 12-184.108.40.206 (f)(3)(i) – Maximum Time Recorded: .91 sec.
Anti-Static: ANSI/ESD 57-1 1994 Protection of Electrostatic Discharge of Susceptible Items:
Surface to Ground – 2.1 x 10^7 ohms @ 50% Relative Humidity
Surface to Griund – 3.2 x 10^7 ohms @ 12% Relative Humidity
Surface to Surface – 8.2 x 10^5 ohms @ 50% Relative Humidity
Surface to Surface – 8.5 x 10^5 ohms @ 12% Relative Humidity
ASTM C1028-96 Static Coefficient of Friction: Dry – .92 Wet = .86
Anti-fatigue mats should be cleaned daily by sweeping or brushing to remove loose soil and debris. These impurities can cause excessive wear on the surface of the mats and shorten product life. The floor under the mats should also be kept as clean and dry as possible to protect the bottom of the mats and reduce mat movement.
On a regular basis, anti-fatigue mats should be cleaned with water-based cleaners to remove oil and grease where needed. We do not recommend the use of solvent-based cleaners. It is important to use cleaners strong enough with proper agitation to remove fats and other food related oils. Research has shown that even grease-proof rubber can be affected by grease and oil if the grease and oil are allowed to remain in contact with the mat for extended periods of time. Andersen recommends thorough cleaning at least weekly to avoid prolonged contact of grease with the rubber.
Only logged in customers who have purchased this product may leave a review.
If you need replacement graphics or replacement parts that you can’t find online give us a call at 1-877-268-7469. We will do everything we can to accommodate your needs.