Click here.
Showing all 3 results
Sold per /FT. Please specify how many FT. needed below.
Click image to make selection
24" power feed. Connects 12VDC power supply to ribbon.
Four, three, or two way connection point.
RGB Controller with 9 pre-programmed sequences.
Data Repeater. Extends power and control. Add a repeater for every 60ft of ribbon.
Choosing a Power Supply: This Ribbon Tape requires 3.2watts of power per foot. Take the length of Ribbon Tape you require (in feet) and multiply by 3.2; this will be the wattage you need to operate the tape properly.
Please Note: Do not max out a power supply's wattage. Aim for no more than 80% of the supply's maximum wattage being used during operation.
Input: 100-240v Output: 20w/12DC
Input: 100-240v Output: 40w/12DC
Dimmer: 100%-0% Input: 110v Output: 40w/24DC
Plug in power supply Input: 100-240v Output: 60w/24DC
Dimmer: 100%-0% Input: 100-240v Output: 100w/24DC
Dims: 100%-0% Dimmer: 100-240v Output: 150w/24DC
6" power feed. One side tape slides under coppers, other side hardwires into power supply.
6" joiner, tape slides under coppers
Direct Connector. "Butts" two pieces of tape together
6ft mounting channel
Channel mounting clips
Input: 100-240v Output: 20w/24DC
Sold per /FT. Please specify how many FT. needed of each.
24" power feed (12" of blank tape, 12" of twin wire)
6" joiner, male and female end
12" joiner, male and female end
Four-Way connector
Choosing a Power Supply: This Ribbon Tape requires 1.8watts of power per foot. Take the length of Ribbon Tape you require (in feet) and multiply by 1.8; this will be the wattage you need to operate the tape properly.
Input: 100-240v Output: 10w/24DC