RP Series Folding Tables

RP Series Folding Tables

Light Weight * Strong * Space Saver Design

3/8" Thick Stained Plywood Top

Steel Box Beam Frame & Edge

This light weight, yet incredibly strong table is aptly named RP (Renters Preference) Space Saver Tables. Why? Because this table was specially designed to meet the demanding needs of the rental industry.

It's low profile design means this table stores in a minimum amount of space. When folded, the RP Table is only 1-5/8" thick! Of course, weight is as important as storage in this industry, and our 8' RPs weigh only 54 pounds - 22% lighter than ordinary plywood tables.

The RP Table's solid construction completes the package. The 3/8" plywood top is supported by a one-piece steel frame and edge that is secured to the table top with rivets.

RP Tables occupy 40% less space in your warehouse and on your delivery vehicles to reduce operational costs.

Extra thick, 14 gauge steel leg construction stands up to heavy use without bending. Non-removable, high impact plastic leg glides protect floors.

Leg braces incorporate spring loaded, case hardened steel detents for long life and fast set-up & tear-down.

Box formed, 16 gauge steel beams are riveted to plywood tops for maximum strength and durability. Steel edges protect tables from damage. Wishbone leg assemblies are permanently anchored within support beams to added security.

Metal Finish Colors

Black, Brown

Plywood Finish

Plywood tops are finished with a walnut stain and then sealed with two coats of lacquer to repel spilled liquids.

20% Sale!

For a limited time, take an additional

20% off prices listed.

TABLE STYLE	MODEL NO	SIZE W x L x H	WT LBS	Price
Seminar	RP618 RP818	18" x 72" x 30" 18" x 96" x 30"	35 39	$162.90 $179.00
Wishbone Leg	RP630 RP830	30" x 72" x 30" 30" x 96" x 30"	43 53	$206.30 $213.30
Pedestal Leg	RP6* RP8*	30" x 72" x 29" 30" x 96" x 29"	44 54	$206.30 $213.30

* To match tables manufactured prior to 1998. Height is approximately 29".

Specifications

TOPS AND FRAMES
Tops are constructed of solid 3/8" thick, AC grade, exterior glue plywood, finished with a walnut stain and sealed two coats of clear lacquer. Frames, consisting of 16 gauge steel channels, 1" wide x 1 1/8" high, are secured to the plywood top with flathead rivets.

LEG ASSEMBLIES
Leg assemblies are wishbone style, constructed with one-piece load bearing vertical members of 1" diameter, 16 gauge steel tubing. Each leg is capped with high impact plastic guides, secured with internal spring steel grippers.

LEG BRACE MECHANISMS
Folding leg braces are constructed of 7/8" wide, 1/8" thick edge radiused steel. Coil-spring actuated, case-hardened steel detents engage mating holes in the brace to secure the brace automatically when it is opened. Leg braces are attached to leg assemblies and pivot bracket by the use of steel shoulder rivets. Pivot brackets are anchored to the table tops with screws, flathead bolts and locking nuts.

METAL FINISH
All metal parts shall be thoroughly cleaned and phosphatized to enhance paint adhesion. Metal parts are to be finished with a thermofused epoxy powder coating.