|
 1.
The thermoformed, high-impact ABS plastic is extremely
durable and stain resistant.
2. The thermoplastic
honeycomb core utilizes a small cell, isotropic structure to deliver a
high load capacity and impact resistance with the lightest weight
possible.
3. Bonding of the outer
ABS plastic skin to the honeycomb is aided by a continuous, non-woven
substrate that is fused to the honeycomb core to provide a 100% boding
area for the epoxy adhesive. This construction results in maximum
tensile and peel strength.
4. A multi-wall
bumper edge molding, composed of high-impact, injection molded, PVC
plastic is bonded to the table's ABS top and bottom to provide five
layers of protection against impact from rough handling.
5. Corners are
protected against damage by high-impact, injection molded, PVC guards.
Corner guards are reinforce with integral ribs and joined to the bumper
edge molding with interlocking tenons.
6. Formed
channels of 16-gauge steel, surround the tabletop to provide maximum
support for heavy loads. No wood is used in this product!
7. Steel plates
are epoxy bonded to the ABS plastic bottom and the honeycomb core to
provide solid anchoring points for the legs and the leg brace
mechanisms.
8. The underside
of the tabletop is surface with thermoformed, ABS plastic to completely
encase all internal core and frame members. |
